RUN-OFF POSITIVELY PASSED
07 Apr 2019 | News
The plate roll E79 2177-S has been tested in Italy. the machine performed the following pipe with positive result: Thickness 63 mm (2,5″) Pipe ID 711 mm (28″) Plate width: 2000 mm...
End the design phase
03 Apr 2019 | News
The new “baby” has finish its design stage, now will start the production phase. The E79-1400 has a bending power of 1400 Ton, pre-bending thickness of 3″, pipe ID of 32″, 7&pr...
Versatility
03 Mar 2019 | News
the longer plates can be easily rolled thanks to the design of our machines. even on the back side of the machine there are no obstacles. Thanks to our design, which come from over 50 years of e...
Vertical Tank System Assembled and Accepted
02 Mar 2019 | News
We have installed a new Vertical Tank System in Usa. The plant is composed by different station. Decoiler station with tiltabe platform up to 45° Straightening rollers to remove the coi...
Pipe Production System
01 Mar 2019 | News
We have installed a new 20’ Pipes Production System in Asia. The plant is composed by: Automatic trolley that brings the sheet pack on the loading area Automatic loading system with v...
Vertical Bending Machine System
28 Feb 2019 | News
Tested our Vertical Tank System for large diameters for our American Customer. Main features of the system are Width of the plate: 2500 mm (98″) Plate thickness: 12 mm (1/2″) ...
Installed a 440TON Hydraulic C Press
27 Feb 2019 | News
Last week has been installed at our italian customer facilities a 44o Ton hydraulic C press. The machine is equipped with an NC controll with self learingin programming system ...
Fantastic Job...!
27 Feb 2019 | News
Look what our plate bending machine E79 3175 can do: Plate thickness: 61 mm (2.4″) Plate width: 3050 mm (118″) Pipe ID: 792 mm (31″) Machine top roll diameter: 700 mm (27...